As standard, the Rubb building is supplied with vent openings in the gables to allow some natural ventilation. Other openings can be positioned in the sidewalls to provide a higher level of natural ventilation. These openings can be fitted with ventilation fans to provide the recommended number of air changes per hour, to suit the activity within the building. Special ventilation i.e. paint spray, fumes, soot and exhaust extraction can also be accommodated within our services.
Ventilation is required to:
As part of the service we also undertake a comprehensive heating installation designed to comply with individual requirements and locations. We can utilise existing sources on site, i.e. gas, LPG, electric etc. Heating units, including the re-circulation, type can be located either inside or outside the building and supplied with various types of ductwork to provide the correct environmental conditions for the activity within the building.
It is commonly held that storage structures must be heated to prevent moisture problems. This is not the case and savings of up to 75% can be made using dehumidification as compared to heating. Due to the fact that Rubb structures are covered in a virtually air tight fabric, they are ideal for dehumidified storage. A ground sheet can easily be welded to the sidewalls to prevent rising damp from any existing floor slab. Rubb can supply complete dehumidified storage systems for use in existing warehouses and other buildings.
Air conditioning can be provided for the whole or specific areas within the building to suit the clients’ requirements. In general, all other pipe services, e.g. compressed air, water, gas or oil can be installed.
The EFASS range of buildings has been designed to allow the user to heat, ventilate, dehumidify or air condition the hangar.
Structures are supplied with the duct inlet points ready for HVAC unit attachment.
Rubb can provide HVAC units if required or the client can use existing units if they are already available on site.
